Royal Blue and Golden Star Crochet Bedspread — Free Crochet Pattern

Materials

• Royal-blue yarn: Approximately 3,000–4,500 yards for a queen-size bedspread, depending on motif size, border depth, and stitch tension.
• Golden-yellow yarn: Approximately 700–1,200 yards for the star centers and decorative details.
• Yarn weight: Worsted-weight yarn, approximately category 4, preferably a durable cotton or cotton-blend yarn suitable for bedding.
• Main crochet hook: 5.0 mm (US H/8), or the size needed to achieve a firm, flexible fabric.
• Texturing hook: 5.5 mm (US I/9), optional if raised stitches feel too tight with the main hook.
• Yarn needle: For sewing motifs together and weaving in ends.
• Stitch markers: At least four markers for identifying corners and star points.
• Scissors: For trimming yarn ends.
• Blocking equipment: Blocking mats, rust-resistant pins, and a measuring tape.

Yardage is an estimate rather than a guaranteed quantity. Make one complete square before purchasing the entire yarn supply, weigh the finished motif, and calculate the amount needed for your chosen blanket dimensions.

Abbreviations

Instructions

Pattern notes: The motif instructions use US crochet terminology. The square is designed around a golden four-point center and a blue outer structure. Because the photograph does not reveal individual stitch paths, use the following repeatable motif as a practical construction method rather than an exact stitch-for-stitch transcription. The sample motif should measure approximately 10–12 inches after blocking, depending on yarn, hook, and tension.

Part 1: Golden Star Center — Gold (make 1 per square)

The golden center forms a compact four-point star. The chain spaces create the pointed outline, while taller stitches fill the spaces between the points. Keep the chains at the four tips loose enough to prevent the star from curling.

1. Round 1: With golden-yellow yarn, make a magic ring. Ch 3 (counts as dc), work 11 dc into the ring, and join with a sl st to the top of the beginning ch-3. Pull the ring closed firmly. (12 dc)
2. Round 2: Ch 1, sc in the same joining stitch. Ch 3, sk the next 2 sts, sc in the next st, ch 3, sk the next 2 sts, sc in the next st, ch 3, sk the next 2 sts, sc in the next st, ch 3, sk the next 2 sts, and join to the first sc. (4 sc, 4 ch-3 spaces)
3. Round 3: Sl st into the first ch-3 space. In that space, work (sc, hdc, 3 dc, ch 3, 3 dc, hdc, sc). Repeat in each of the remaining three ch-3 spaces. Join with a sl st to the first sc. (4 star points; each point contains 2 sc, 2 hdc, 6 dc, and a ch-3 tip)
4. Round 4: Sl st to the first ch-3 tip. Ch 1, sc in the same tip space, ch 3, sc in the same space to emphasize the point. Work sc evenly down the side of the star, placing one sc in each suitable stitch and adding a small chain space at each valley between points. Repeat around all four points, keeping the sides balanced. Join with a sl st and FO. (Stitch count varies with side placement; four clearly defined points)

Lay the star flat before continuing. If the points curl inward, gently stretch the chain tips and check that you have not tightened the stitches excessively. The gold shape should be open and angular rather than a dense round circle.

Part 2: Royal-Blue Square Foundation — Blue (make 1 per square)

The blue foundation provides the square outline and the structure needed to attach the raised leaf panels. Work into the golden star’s outer stitches and spaces. The four star tips become the square’s corner landmarks, while the valleys between points form the middle of the sides.

1. Round 1: Join royal-blue yarn with a sl st at one star tip. Ch 3, work 2 dc into the same tip space, ch 2, work 3 dc into the same space. This forms the first corner. In the next side section, work 3 dc across the side, then (3 dc, ch 2, 3 dc) in the next star tip. Repeat across all four sides and join to the beginning ch-3. (4 corner ch-2 spaces; 4 groups of 3 dc on each side, adjusted to the star’s available stitches)
2. Round 2: Sl st across to the first corner ch-2 space. Ch 3, work (2 dc, ch 2, 3 dc) in the corner. Work 3 dc in each available space along the side, keeping the groups evenly distributed. At each remaining corner, work (3 dc, ch 2, 3 dc). Join to the beginning ch-3. (4 corner ch-2 spaces; side-group count increases evenly)
3. Round 3: Ch 1, sc in each stitch across the first side. In each corner ch-2 space, work (2 sc, ch 2, 2 sc). Continue around, placing one sc in every dc and keeping the corner increases consistent. Join to the first sc. (Continuous sc round; 4 corner ch-2 spaces)
4. Round 4: Ch 3, dc in each stitch across the first side. In each corner ch-2 space, work (2 dc, ch 2, 2 dc). Continue around and join to the beginning ch-3. (Continuous dc round; 4 corner ch-2 spaces)

Measure the foundation before adding the raised sections. It should be square, with four clear corners and enough room for the blue leaf motifs. If the sides bow, loosen the tension or add a small number of evenly spaced stitches along each side on the next square. Use the same adjustment on every motif.

Part 3: Raised Blue Leaf Motifs — Blue (make 4 per square)

The leaf-like shapes are the main textured feature of the design. Each one is worked as a curved, raised panel against the blue foundation. The four panels are positioned toward the corners and point inward toward the gold star. Work the panels with consistent tension so the motifs sit raised without pulling the square out of shape.

1. Row 1: With the RS facing, join blue yarn at the inner edge of a corner section. Ch 1 and work 7 sc evenly along the intended leaf panel base. Turn. (7 sc)
2. Row 2: Ch 1, sc in the first st, hdc in the next st, 3 dc in the next st, hdc in the next st, sc in the next 2 sts, and turn. (7 sts)
3. Row 3: Ch 1, sc in the first 2 sts, hdc in the next st, 3 dc in the next st, hdc in the next st, sc in the last 2 sts, and turn. (9 sts)
4. Row 4: Ch 1, sc in the first 2 sts, hdc in the next 2 sts, 3 dc in the next st, hdc in the next 2 sts, sc in the last 2 sts, and turn. (11 sts)
5. Row 5: Ch 1, sc in the first 3 sts, hdc in the next 2 sts, 3 dc in the next st, hdc in the next 2 sts, sc in the last 3 sts, and turn. (13 sts)
6. Row 6: Ch 1, sc in the first 3 sts, hdc in the next 3 sts, 3 dc in the next st, hdc in the next 3 sts, sc in the last 3 sts, and turn. (15 sts)
7. Row 7: Ch 1, sc in the first 4 sts, hdc in the next 3 sts, 3 dc in the next st, hdc in the next 3 sts, sc in the last 4 sts, and turn. (17 sts)
8. Row 8: Ch 1, sc in each stitch across. FO, leaving a long tail for sewing. (17 sc)

Position each panel diagonally within a corner of the square. The narrow end should point toward the gold star, and the broader rounded end should follow the outer edge. Pin the panel before sewing it down. Use small, discreet stitches along its base and sides, leaving the central curved ridge visible. Repeat for the other three corners, checking that all four panels are arranged symmetrically.

Texture option: For a more pronounced ridge, work the leaf panels in back loops only on Rows 3–7. This creates a visible line of texture. Use the same method for all four panels of every square.

Part 4: Raised Leaf Veins — Blue (make 4 per square)

The decorative veins add depth to the leaf panels. They are worked on the surface with post stitches, following the natural direction of each leaf from its broad outer edge toward the pointed inner end.

1. Row 1: Join blue yarn at the broad end of a leaf panel. Ch 2, work FPdc around the nearest suitable stitch or post at the center line, then sl st at the next secure point toward the tip. FO and weave in the end. (1 FPdc, 1 sl st)
2. Row 2: For an optional second vein, join yarn slightly to one side of the first line. Ch 1, work 2 sl sts along the surface of the panel toward the tip, keeping the yarn relaxed. FO. (2 sl sts)

Do not pull the surface stitches tight. Their purpose is to create a subtle raised line, not to gather the panel. If the leaf already looks sufficiently textured, omit the second vein.

Part 5: Joining and Squaring the Motifs — Blue (repeat for every square)

Before joining the bedspread, block each square to the same dimensions. Align the points of the gold stars in the same direction and ensure that the raised blue panels are consistently positioned.

1. Round 1: Join blue yarn at any corner ch-2 space of the foundation. Ch 1, work (2 sc, ch 2, 2 sc) in the corner. Sc evenly along the side, placing one sc in each stitch. Repeat the corner treatment at all four corners and join. (4 corner ch-2 spaces; side count depends on the foundation)
2. Round 2: Ch 1, sc in each stitch around. In each corner ch-2 space, work (2 sc, ch 2, 2 sc). Join to the first sc. (4 corner ch-2 spaces; even sc edging)

Repeat the edging only if necessary to make the square edges firm and consistent. Avoid adding too many stitches, as excessive increases can cause the edges to ruffle. If the square is already the desired size, use just one finishing round.

Part 6: Assemble the Bedspread

For a queen-size bedspread, begin with a layout of 6 motifs across and 8 motifs down. The final dimensions depend on the blocked size of each square and the joining method. A larger bedspread can use 7 by 9 motifs, while a smaller cover can use 4 by 6 motifs.

1. Step 1: Arrange the squares on a flat surface with the gold star points facing the same direction. Alternate the visual direction only if you deliberately want a different geometric effect.
2. Step 2: Join two squares with their edges aligned. With royal-blue yarn, sl st through the corresponding edge stitches of both squares, working from one corner to the other. Keep the joining tension consistent.
3. Step 3: Join the remaining squares into horizontal strips. Count the motifs in each strip before continuing.
4. Step 4: Place two strips together and join their long edges with the same blue slip-stitch method. Match every intersection carefully so the square grid remains straight.
5. Step 5: Continue joining strips until the entire blanket is assembled. Lay the work flat after each few strips to check the alignment and overall shape.
6. Step 6: Weave in all loose ends securely on the reverse side, taking care not to flatten the raised leaf panels.

Part 7: Royal-Blue Border

A substantial blue border frames the star motifs and gives the bedspread a finished appearance. A simple textured border complements the ornate center without competing with it.

1. Round 1: Join blue yarn at a corner. Ch 1, sc evenly along the first side, placing one sc in each stitch and an appropriate number of sc around the ends of joining seams. At each corner, work (2 sc, ch 2, 2 sc). Continue around and join. (4 corner ch-2 spaces)
2. Round 2: Ch 3, dc in each stitch along the sides. Work (2 dc, ch 2, 2 dc) in each corner ch-2 space. Join to the beginning ch-3. (4 corner ch-2 spaces)
3. Round 3: Ch 1, sc in each stitch around. Work (2 sc, ch 2, 2 sc) in each corner space. Join and FO. (4 corner ch-2 spaces)

For a thicker frame, repeat the dc round once before the final sc round. Keep the border flat, particularly at the corners. A border that waves usually has too many stitches; a border that cups inward usually needs more stitches along the sides.

Part 8: Matching Pillow Covers

Make two or more pillow covers using the same royal-blue and gold motif. A standard 18-inch decorative pillow can use one large motif on each side if your finished square is close to that size. Otherwise, join four smaller motifs to create each panel.

1. Front panel: Make the required motifs using Parts 1–5. Join them into a square or rectangle that measures slightly smaller than the pillow insert for a firm finish.
2. Back panel: Make a second panel of the same dimensions. For a simpler reverse side, use plain blue squares with the same edging.
3. Assembly: Place the panels with their wrong sides facing inward. Join three sides using royal-blue yarn and sl sts through both layers.
4. Closure: Leave the fourth side open and add a zipper, buttons, or a crocheted envelope flap. For buttons, make evenly spaced chain loops along one edge and sew buttons opposite them.
5. Finishing: Insert the pillow form and check that the seams are secure. Weave in loose ends and gently block the cover if needed.

Finishing

Inspect the entire bedspread for loose yarn ends, uneven seams, or raised sections that have pulled away from their bases. Secure loose ends with a yarn needle, weaving each end through several stitches in different directions. Avoid cutting the yarn immediately beside a stitch, because the end may work loose with use.

Block the finished bedspread according to the yarn manufacturer’s care instructions. For washable cotton yarn, gentle washing and flat drying are usually suitable, but check the yarn label first. Shape the corners and border while the fabric is damp, using measuring marks to keep the edges straight. Do not stretch the fabric aggressively, as this can distort the star points and separate the joins.

Allow the blanket to dry completely before placing it on the bed. Arrange the matching pillow covers against the headboard, with the gold stars facing forward. The finished set should have a consistent royal-blue field, clearly visible golden centers, raised blue corner motifs, and a neat border.

Tips for Success

• Make a complete sample first. Test the center, foundation, and raised panels together. A small test square is the best way to assess the final scale and texture before committing to a large blanket.
• Use consistent yarn. Choose yarns of similar weight and fiber composition so the blue and gold sections behave similarly after washing.
• Keep the star points defined. Do not tighten the chain spaces at the four tips. These spaces are essential for creating a crisp, recognizable four-point shape.
• Count the corners regularly. Mark each corner space while working the square foundation and edging. Missing one corner increase can make the motif noticeably uneven.
• Test your raised stitches. If FPdc stitches pull the leaf panel too tightly, try a slightly larger hook for the decorative details.
• Block before joining. Individual motifs are easier to square and measure before they become part of a large bedspread.
• Use a flat joining surface. A table or clean floor helps you identify mismatched edges and keeps the grid aligned as the blanket grows.
• Protect the raised texture. When washing or storing the finished bedspread, avoid excessive friction that could fuzz the leaf panels or loosen surface details.

Common Mistakes to Avoid

• Uneven star points — This usually happens when the chain spaces are different sizes or the stitches around the points are too tight. Keep the four tips consistent and check the shape before beginning the blue foundation.
• A wavy square — Too many increases or inconsistent stitch placement can cause the sides to ripple. Count the corner spaces and distribute stitches evenly along each side.
• A curling square — Tight tension or too few side stitches may cause the fabric to cup. Try a larger hook or add a small number of evenly spaced stitches in the next foundation round.
• Raised leaves that look different — Changes in tension and row placement make the corner panels uneven. Use the same number of rows for every leaf and compare them before sewing.
• Visible joining gaps — Misaligned stitches or loose slip stitches can leave holes between squares. Match corresponding edge stitches and keep the joining yarn at a steady tension.
• Bulky intersections — Several seams meeting at one point can create a thick knot. Keep seam ends tidy and weave yarn tails into separate paths rather than stacking them in one location.
• An overly tight border — A border with insufficient stitches can draw the blanket inward. Add evenly spaced stitches along the edges and check that the bedspread lies flat before finishing.

Ways to Customize This Pattern

• Classic sapphire and gold: Use a deep sapphire blue with a warm antique-gold center for a dramatic traditional look.
• Navy and mustard: Replace royal blue with navy and choose a muted mustard yellow for a more understated bedroom palette.
• Emerald and champagne: Use dark emerald green with pale golden-beige centers for a rich jewel-tone variation.
• Ivory and blue: Use ivory for the foundation and deep blue for the raised leaf motifs, retaining gold only in the star centers.
• Smaller motifs: Use a lighter yarn and smaller hook to create a lighter throw or a decorative cushion cover.
• Larger bedspread: Increase the motif size or add more rows to the foundation, ensuring that all motifs use the same dimensions.
• Decorative edging: Replace the simple border with a shell or picot edge. Make a small sample first to ensure the decorative edging lies flat.
• Coordinated accessories: Use the same star motif for cushion covers, a bedside runner, or a smaller lap blanket. Keep the blue-to-gold ratio consistent for a coordinated collection.