Pink & Cream 3D Layered Floral Bedspread — Free Crochet Pattern

Materials

• Yarn: Worsted weight (Category 4) 100% acrylic or 50/50 cotton-acrylic blend yarn.
  • Color A (Dusty Pink): ~1,800 meters (~1,960 yards) for inner flower cores, pillow accents, and borders.
  • Color B (Off-White / Cream): ~2,600 meters (~2,840 yards) for large outer petals and main blanket drape.
• Crochet Hook: 5.0 mm (US H/8) ergonomic crochet hook, or size required to obtain recommended gauge and smooth drape.
• Notions: Tapestry needle for seaming and weaving in ends, locking stitch markers, sharp yarn scissors, measuring tape.
• Blocking Tools: Blocking foam mats, stainless steel rust-proof T-pins, and steam iron or spray bottle.

Abbreviations

Instructions

Main 3D Dual-Layer Floral Motif (make ~170 motifs for Queen size)

Each floral motif is constructed in two layers: an inner raised 5-petal ring in dusty pink, followed by 5 large ribbed outer petals in off-white cream worked onto rear anchor loops.

Part 1: Inner Raised Pink Blossom (Color A Dusty Pink)

1. Round 1 (Center Core Ring – Color A Pink): With Color A (Dusty Pink), make a magic ring (or ch 5, sl st to join). Ch 1, work 10 sc into the ring. Join with sl st to first sc. Pull ring tail tight. [10 sc]
2. Round 2 (Establishing 5 Petal Bases): *Ch 4, skip 1 st, sc in next st; repeat from * 4 more times around. [5 ch-4 loops]
3. Round 3 (Inner Pink Petals – Row 1): In each ch-4 loop work [1 sc, 1 hdc, 2 dc, 3 tr, 2 dc, 1 hdc, 1 sc]. Sl st in valley between loops. [5 pink petals]
4. Round 4 (Inner Pink Petals – Row 2 Ribbed Edging): Ch 1, sl st in BLO of each st across the outer curve of all 5 pink petals to create a raised ribbed edge. Fasten off Color A. [5 3D raised pink petals]

Part 2: Outer Large Cream Petals (Color B Off-White Cream)

1. Round 5 (Rear Anchor Foundation – Color B Cream): Working behind Round 4 pink petals, attach Color B (Cream) around the back post of the Round 1 stitches. *Ch 6, sc around next back post st; repeat from * 4 more times around. [5 ch-6 loops behind pink flower core]
2. Round 6 (Outer Large Petals – Row 1 Foundation): In each ch-6 loop work [1 sc, 1 hdc, 2 dc, 5 dtr, 2 dc, 1 hdc, 1 sc]. Turn. [13 sts per large cream petal]
3. Round 7 (Outer Large Petals – Row 2 Ribbed Texture): Ch 1, sl st in BLO of each st across the outer curved edge of each cream petal to create a pronounced fan-like ribbed ridge. Sl st into the valley between petals to anchor. [5 large ribbed cream petals]
4. Round 8 (Outer Picot & Join Anchors): Sl st to top curve of first large petal. *Work [2 sc, picot, 2 sc] at the outer peak of each petal, ch 3, 1 sc in valley between petals, ch 3; repeat from * around all 5 large petals. Join with sl st, fasten off Color B, and leave a 25 cm tail for seaming. [Motif diameter = ~16 cm]

Small Floral Gap Fillers (make ~140 filler motifs)

These small star motifs fill the negative space gaps created where 4 circular flowers meet.

1. Round 1 (Color A Pink): Make a magic ring. Ch 1, work 8 sc into ring. Join with sl st. [8 sc]
2. Round 2: *In next st work [sc, hdc, dc, picot, dc, hdc, sc], sl st in next st; repeat from * 3 more times to form 4 small pink star petals. Fasten off, leaving a 20 cm tail for sewing. [4 star petals]

Bedspread Assembly

1. Arrangement: Lay out all 170 main dual-layer floral motifs on a flat surface in a 13 x 13 interlocking floral grid, ensuring all 3D pink flower cores face upward.
2. Invisible Seaming: Place touching flowers right sides together. Using Color B (Cream) and a tapestry needle, whipstitch touching outer cream petal picots together through back loops only (BLO). Each flower connects to neighboring flowers at 4 of its outer petal tips, leaving top and bottom petal curves open for texture.
3. Inserting Gap Fillers: Position a Small Pink Gap Filler into each open space between 4 circular main flowers. Hand-sew the 4 star petal picots directly to the touching cream petal picots using the pink yarn tail.

Continuous Outer Scalloped Bedspread Border

1. Round 1 (Base Anchor Row – Color B Cream): Attach Color B (Cream) yarn at any outer petal tip along the edge of the assembled bedspread. Ch 1, work single crochets evenly around all 4 outer edges, placing 3 sc into outer corner points and 1 sc dec in inner valleys between flowers. Join with sl st.
2. Round 2 (Open Mesh Band – Color B Cream): Ch 4 (counts as dc + ch 1), *skip 1 st, dc in next st, ch 1; repeat around entire outer perimeter, working [2 dc, ch 2, 2 dc] into outer corners. Join with sl st.
3. Round 3 (Scalloped Shell Border – Color A Pink): Switch to Color A (Dusty Pink). *In corner ch-sp work [4 dc, picot, 4 dc], sc in next ch-sp, *skip 2 sts, work [3 dc, picot, 3 dc] in next ch-sp, sc in next ch-sp; repeat from * continuously around all 4 sides of the bedspread to form the draped scalloped edging. Join with sl st, fasten off, and weave in all loose ends.

Matching Decorative Pillow Shams & Lumbar Cover (make 2 shams + 1 lumbar)

Square Pillow Shams (45 x 45 cm) — make 2

1. Front Panel Assembly: Join 9 main dual-layer floral motifs (3×3 grid) with 4 Small Pink Gap Fillers in the center gaps using Color B (Cream).
   • Work a fill-in border around the perimeter using cream yarn (alternating sc, hdc, and dc) to square off the panel to 45 x 45 cm.
2. Back Panel: With Color B (Cream) yarn, ch 57.
   • Row 1: Dc in 4th ch from hook and in each ch across. Turn. [55 dc]
   • Rows 2–32: Ch 3 (counts as dc), 1 dc in each st across. Turn. Fasten off after Row 32 [55 dc per row; ~45 x 45 cm square].
3. Sham Assembly: Place front and back panels wrong sides together. Single crochet around 3 sides using Color B, insert a 45 x 45 cm pillow form, and sc across the 4th side to seal. Finish with a pink scalloped picot border around the outer sham edge.

Embroidered Lumbar Pillow Cover (30 x 50 cm) — make 1

1. Row 1: With Color B (Cream), ch 62. Hdc in 3rd ch from hook and in each ch across. Turn. [60 hdc]
2. Rows 2–36 (Textured Diamond Lattice): Work 1 dc in BLO of each st across to form a textured cream backdrop. Fasten off after Row 36.
3. Floral Embroidery Accent: Using a tapestry needle and Color A (Dusty Pink) yarn, surface-embroider 3 delicate lavender/flower sprigs across the front panel using lazy daisy and stem stitches.
4. Assembly: Seam front and back panels over a 30 x 50 cm lumbar insert, single crocheting around edges with pink picot trim.

Tips for Success

• Maintain Uniform Double Treble Tension: Pull tall dtr stitches in the outer cream petals to a consistent height so that all flower motifs lay completely flat.
• Steam Block Individual Flowers: Steam-blocking each floral motif to ~16 cm before assembly opens up the petal shapes and makes row-by-row seaming much faster.
• Weave In Center Tails Early: Fasten off and weave in magic ring tails securely on all motifs during initial construction to avoid a tedious finishing workload later.
• Keep Assembly Stitches Relaxed: Avoid pulling joining threads too tightly so that the blanket retains a soft, fluid drape over the mattress corners.
• Choose a High-Definition Yarn: Smooth acrylic or cotton-blend yarn highlights the 3D raised pink center petals and ribbed cream outer petals clearly.

Common Mistakes to Avoid

• Skipping Motif Blocking — Unblocked 3D flowers tend to curl inward at the edges, causing puckered, uneven seams during assembly.
• Over-tightening Rear Anchor Loops — Pulling Round 5 rear chain loops too tight behind Round 4 pink petals will cause the central flower core to bowl or cup.
• Uneven Seaming Tension — Seaming too tightly pulls joints into rigid ridges instead of letting the blanket lie completely flat.
• Mixing Yarn Dye Lots — Ensure all cream and dusty pink skeins share matching dye lots to prevent noticeable shading differences across the broad blanket face.

Ways to Customize This Pattern

• Lavender & Ivory Palette: Swap dusty pink for soft lavender yarn to create a serene provencal bedroom aesthetic.
• Throw Blanket Dimension: Reduce motif count to 60 main flowers (10 x 6 grid) to create a cozy living room throw (~120 x 150 cm).
• Matching Floral Trivets: Work single dual-layer floral motifs in thick cotton yarn to craft structured 3D hot pads or table trivets.