3D Rose Framed Square Bedspread — Free Crochet Pattern

Materials

• Yarn: Worsted weight (Category 4) or DK weight (Category 3) smooth acrylic or cotton-blend yarn.
  • Color A (Soft Blush Pink): ~2,600 meters (~2,840 yards) for central roses, inner lattice grids, outer scalloped borders, and fringe trim.
  • Color B (Silver Grey): ~1,800 meters (~1,960 yards) for inner framing rings and structural contrast borders.
  • Color C (Dusty Rose / Shadow Pink): ~600 meters (~650 yards) for rose core shading and accent details.
• Crochet Hook: 4.5 mm (US 7) ergonomic crochet hook, or size required to obtain recommended gauge and smooth drape.
• Notions: Tapestry needle for seaming and weaving in ends, locking stitch markers, sharp yarn scissors, measuring tape, 20 cm cardboard gauge for fringe cutting.
• Blocking Tools: Blocking foam mats, stainless steel rust-proof T-pins, and steam iron or spray bottle.

Abbreviations

Instructions

Main 3D Rose Framed Square Motif (make ~80 motifs for Queen size)

Each square motif transitions through 4 main stages: a 3D layered pink rose core, an off-white/pink openwork window grid, a solid silver-grey inner square frame, and an outer pink scalloped shell loop border.

Part 1: Central 3D Layered Rose Core (Colors C & A)

1. Round 1 (Rose Center – Color C Dusty Rose): With Color C (Dusty Rose), make a magic ring (or ch 5, sl st to join). Ch 1, work 12 sc into the ring. Join with sl st to first sc. Pull ring tail tight. [12 sc]
2. Round 2 (Inner Petal Ring 1 – Color C): *Ch 3, skip 1 st, sc in FLO of next st; repeat from * 5 more times around. [6 FLO ch-3 loops]
3. Round 3 (Inner Petals – Color C): In each FLO ch-3 loop work [1 sc, 1 hdc, 3 dc, 1 hdc, 1 sc]. Sl st into valley between loops. [6 small inner rose petals]
4. Round 4 (Mid Petal Foundation – Color A Blush Pink): Working behind Round 3 petals into the remaining BLO loops of Round 1, attach Color A (Blush Pink). *Ch 4, sc in next BLO st; repeat from * 5 more times around. [6 BLO ch-4 loops]
5. Round 5 (Mid Petals – Color A): In each ch-4 loop work [1 sc, 1 hdc, 5 dc, 1 hdc, 1 sc]. Sl st in valley between loops. [6 medium rose petals]
6. Round 6 (Outer Petal Foundation – Color A): Working behind Round 5 petals, attach yarn around the back post of Round 4 sc sts. *Ch 5, sc around next back post; repeat from * 5 more times around. [6 ch-5 loops]
7. Round 7 (Outer Petal Layer – Color A): In each ch-5 loop work [1 sc, 1 hdc, 2 dc, 3 tr, 2 dc, 1 hdc, 1 sc]. Join with sl st, fasten off Color C/A. [6 large 3D rose petals; flower diameter = ~8 cm]

Part 2: Openwork Window Lattice Frame (Color A Blush Pink)

1. Round 8 (Rear Lattice Foundation): Attach Color A behind Round 7 rose petals. *Work [3 tr, ch 3, 3 tr] in back of corner petal tip to establish square corners, ch 3, (dc in back of next st, ch 1, skip 1 st) twice across side, ch 3; repeat from * 3 more times around all 4 sides. Join with sl st to top of starting tr. [4 corner ch-3 sps, 16 window grid spaces]
2. Round 9 (Expanding Filet Window Grid): Ch 4 (counts as dc + ch 1), *skip 1 st, dc in next st, ch 1; repeat across side to corner, work [2 dc, ch 2, 2 dc] in corner ch-sp; repeat around all 4 sides to build the open window grid frame surrounding the rose. Join with sl st. [24 window grid spaces total]
3. Round 10 (Solid Window Framing Ring): Ch 3 (counts as dc), work 1 dc in each st and 1 dc in each ch-1 window sp across all sides, working [2 dc, ch 2, 2 dc] into each corner ch-sp. Join with sl st. Fasten off Color A. [80 dc]

Part 3: Contrast Grey Outer Frame & Pink Scallops (Colors B & A)

1. Round 11 (Grey Framing Ring – Color B Silver Grey): Attach Color B (Silver Grey) in any corner ch-sp. Ch 3, work 1 dc in each st around, working [2 dc, ch 2, 2 dc] into each corner ch-sp. Join with sl st. Fasten off Color B. [96 dc]
2. Round 12 (Scallop Foundation – Color A Blush Pink): Attach Color A in any corner ch-sp. *Ch 4, skip 2 sts, sc in next st; repeat from * along each side, working [sc, ch 5, sc] into each ch-2 corner sp. Join with sl st. [20 side arches, 4 corner loops]
3. Round 13 (Outer Scalloped Shell Loops – Color A): *In corner ch-5 loop work [5 dc, picot, 5 dc], sc in next ch-arch, (work 7 dc in next ch-arch, sc in next ch-arch) across side; repeat from * around all 4 sides. Join with sl st, fasten off, and weave in all loose ends securely. [Motif size = ~22 x 22 cm]

Bedspread Assembly

1. Arrangement: Lay out all 80 completed 3D rose framed square motifs on a clean, flat surface in an 8 x 10 grid, ensuring all central roses and grey framing rings line up precisely across the mattress top.
2. Invisible Seaming: Place adjacent squares right sides together. Using Color B (Silver Grey) or Color A (Blush Pink) yarn with a tapestry needle, whipstitch through the back loops only (BLO) of matching outer shell picots and side stitches. This joins the motifs into a smooth, flexible seam grid across the entire blanket face without raised ridges.

Continuous Outer Border & Flowing Fringe Trim

1. Round 1 (Base Anchor Row – Color B Grey): Attach Color B (Silver Grey) yarn in any outer corner point of the assembled bedspread. Ch 1, work single crochets evenly around all 4 outer edges, placing 3 sc into outer corner points and 1 sc dec in inner seams where motifs meet. Join with sl st.
2. Round 2 (Open Mesh Band – Color A Pink): Switch to Color A (Blush Pink). Ch 4 (counts as dc + ch 1), *skip 1 st, dc in next st, ch 1; repeat around entire outer perimeter, working [2 dc, ch 2, 2 dc] into outer corners. Join with sl st.
3. Round 3 (Scalloped Outer Trim – Color A Pink): *In corner ch-sp work [5 dc, picot, 5 dc], sc in next ch-sp, *skip 2 sts, work [4 dc, picot, 4 dc] in next ch-sp, sc in next ch-sp; repeat from * continuously around all 4 sides of the bedspread. Join with sl st and fasten off.
4. Flowing Fringe Trim (Bottom & Side Drapes): Cut strands of Color A (Blush Pink) yarn into 40 cm lengths. Group 4 strands together, fold in half to form a loop, and attach using a lark’s head knot through each lower scalloped shell loop along the hanging drapes of the bedspread. Trim ends evenly to ~18 cm length.

Matching Decorative Pillow Shams (make 2)

Front Sham Panel

1. Join 4 main 3D Rose Framed Square Motifs in a 2×2 square formation using Color B (Silver Grey).
2. Work Round 11, Round 12, and Round 13 of the motif instructions around the perimeter of the 2×2 block to square off the panel to ~45 x 45 cm.

Back Sham Panel

1. Row 1: With Color B (Silver Grey), ch 57. Dc in 4th ch from hook and in each ch across. Turn. [55 dc]
2. Rows 2–32: Ch 3 (counts as dc), 1 dc in each st across. Turn. Fasten off after Row 32 [55 dc per row; ~45 x 45 cm square].

Sham Assembly

Place front and back panels wrong sides together. Single crochet around 3 sides using Color B, insert a 45 x 45 cm pillow form, and sc across the 4th side to seal. Finish with a pink scalloped picot border around all 4 outer sham edges.

Tips for Success

• Maintain Uniform Petal Height: Keep even tension when pulling up double crochet and treble stitches in the 3D rose center so that all 80 flowers lie uniform in height before framing.
• Steam Block Individual Squares: Steam-blocking each motif to ~22 x 22 cm before assembly flattens the openwork window grid, aligns the grey framing borders, and makes row-by-row seaming much faster.
• Weave In Ends Color-by-Color: Fasten off and weave in loose ends at each color transition during motif construction to avoid a tedious finishing workload at the end.
• Keep Assembly Stitches Relaxed: Avoid pulling joining threads too tightly so that the dark grey framing seams lie completely flat without buckling.
• Use Cardboard for Uniform Fringe: Wrap yarn around a sturdy 20 cm cardboard piece to cut dozens of uniform fringe strands quickly for the outer draped edges.

Common Mistakes to Avoid

• Skipping Motif Blocking — Unblocked floral squares pull inward at the 3D rose center, causing puckered, uneven seams during assembly.
• Over-tightening Rear Anchor Loops — Pulling Round 4 and Round 6 rear chain loops too tight behind Round 3 petals will cause the central flower core to bowl or cup inward.
• Uneven Seaming Tension — Seaming too tightly along the grey outer borders creates rigid ridges instead of a flat blanket surface.
• Mixing Yarn Dye Lots — Ensure all skeins of soft blush pink and silver grey share matching dye lots to prevent noticeable shading differences across the broad background.

Ways to Customize This Pattern

• Cream & Gold Vintage Palette: Swap silver grey for warm taupe and replace blush pink with rich cream and gold for a victorian antique aesthetic.
• Throw Blanket Dimension: Reduce motif count to 35 squares (5 x 7 grid) to create a cozy living room throw (~110 x 150 cm).
• Matching Floral Coasters & Trivets: Work single motifs through Round 10 in heavy cotton yarn to craft matching floral hot pads or table trivets.